River & Art Epoxy Resin, 1 to 10 cm pouring thickness
River & Art Epoxy Resin, 1 to 10 cm pouring thickness
In stock
Ordered and paid on a working day: usually ships the same day
Delivery to Netherlands: usually within 1 working day
- 30-day returns
- Over 100,000 happy customers
- Pay later with Klarna
- Personal advice from material experts
Question about this product? Our material experts are happy to help you choose the right product. Contact us
This clear epoxy casting resin is especially for casting objects and river tables with a thickness between 1 and 10 cm or for larger jewelries. This epoxy resin has good fluidity and contains a UV blocker. The River & Art epoxy resin can be colored intensively with various epoxy color pigments for a spectacular result.
For thinner castings use, for example: SAM Laminating Epoxy Resin - 0.1 to 2 cm thick lamination
For thicker castings, use the: SAM Deep Epoxy Resin - 5 to 20 cm thick casting
Specifications
- Mixing ratio by weight: A:B = 100:50
- Color: clear, colorless
- Processing time 100 gr. at 25°C: 40 minutes
- Curing time at 25°C: 18-24 hours
- Fully cured after: 3 days
- UV blocker: yes
- Hardness: Shore D 75
- Density: 1.09 g / cm³
- Viscosity: 300-600 cPs
- Temperature resistant up to: 80°C
- Minimum casting thickness:1 cm
- Maximum casting thickness: 10 cm
- Maximum quantity to be processed in one go:60 kg*
*With a larger quantity, the processing time and curing time will be shorter!
**We recommend not to process the maximum amount in one go if you have little experience. If you want to do this, work at 18°C with a mixing bucket with a large bottom/diameter and now that you have a very short processing time!
Processing
Make sure that the surface is tight and not porous. This can cause air bubbles in the epoxy. Use a thin layer of epoxy or primer for this.
Always use safety gloves and goggles when handling this material. Process the resin at room temperature (18-25oC) and at a humidity lower than 70%. In order not to get any deformation in the surface, the temperature must remain constant during the entire curing process. Also avoid direct sunlight through a window and prevent drafts.
Add the A and B component in the correct ratio (A: B = 100: 33 by weight) and mix well. Allow enough time for mixing (2-3 minutes) and make sure the corners and bottom of the mixing bowl are included. Optionally, you can pour the whole thing into a second bowl and mix it again. Now add any color effects and stir again. Let air bubbles escape for a minute. If necessary, help by vibrating / rattling the tray. Please avoid the epoxy getting to hot in the mixing bowl. Start pouring immediately if needed.
The Epoxy resin is now ready for use. Pour the mixture into your mold or prepared model with a thin stream.
Please note that you should use a large-bottomed mixing bowl for larger quantities. Avoid creating a thick layer of epoxy in the mixing bowl as this heats up very quickly!
Removing airbubbles works best with Air extractor or by using a flame. Please do not use flames if you thinned the epoxy down with alcohol or other flamable products.
If you are going to apply the resin in several layers (multi-layer work):
Wet on wet:
When pouring a second layer of a liquid into a first layer of epoxy liquid, you have to make sure that the exothermic reaction has completely worn off. An exothermic reaction is a reaction that releases energy. In this case, heat.
If you want to be sure of this, you wait until the second layer is no longer sticky, but still retains a fingerprint when touched.
Wet on dry:
It is necessary to sand the previous layer and make it dust and grease free.
Storage
Product stored in tightly closed packaging between 15 and 25°C has a shelf life of at least 1 year.
Security requirements
H-CodeHazard Statements
H302+H312 - Harmful if swallowed or in contact with skin.
H315 Causes skin irritation.
H317 May cause an allergic skin reaction.
H318 - Causes serious eye damage.
H319 Causes serious eye irritation.
H411 Toxic to aquatic life with long lasting effects.
EUH205 - Contains epoxy compounds. May cause an allergic reaction.
P-Code Precautionary Statements
P102 - Keep out of reach of children.
P270 - Do not eat, drink or smoke when using this product.
P271 - Use only outdoors or in a well-ventilated area.
P273 - Avoid release to the environment.
P280 - Wear protective gloves, Protective clothing, Eye protection.
P301+P310 - IF SWALLOWED: Immediately call a POISON CENTER or doctor/physician.
P301+P330+P331 - IF SWALLOWED: rinse mouth — DO NOT induce vomiting.
P303+P361+P353 - IF ON SKIN (or hair): Take off immediately all contaminated clothing — rinse skin with water/shower.
P304+P340 - IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing.
P305+P351+P338 - IF IN EYES: Rinse cautiously with water for several minutes. remove contact lenses, if possible; keep rinsing.
P501: Dispose of contents and container according to local/regional/national/international regulations.
Documentation
EN - Product Information SAM River and Art Epoxy Resin.pdf
EN - Safety Data sheet River & Art Epoxy Resin A.pdf
EN - Safety Data sheet River & Art Epoxy Resin B Hardener.pdf
| Color A Comp. | Clear |
|---|---|
| Color B Comp. | Clear |
| end Color | Clear, colorless |
| cured density | 1.09 g/cm2 |
| viscosity mixture | 300-600 cPs |
| Mixing ratio A/ B | 100:50 |
| Working Time | 40 minutes |
| Curing time | 18-24 hours (3 days complete) |
| UV-blocker | Ja |
| Maximum casting thickness | 10 centimeters |
| Minimum casting thickness | 1 centimeter |
| Maximum temperature resistance cured | up to 80° C |
| Mainly used for | River tables, 1 to 10 cm thick castings. |
| Shore | D 75 |
| Kg to cast in one go | 60, note the conditions |
| UV Blocker added? | Yes |
Frequently asked questions
What is the delivery time for my order?
Orders placed and paid on working days are in most cases shipped the same day. Weekend orders are processed on the next working day.
Indicative delivery times: Netherlands usually within 1 working day, Belgium and Germany typically 1–2 working days, other countries depending on destination and carrier. These are guidelines, not guarantees: peak periods, public holidays or carrier delays can have an effect.
What is the return policy?
You have 30 days to return after receipt. Email info@siliconesandmore.com within 30 days of delivery with your name and order number. The full conditions are in our return policy.
How can I track my order?
As soon as your order has shipped, you'll receive a track & trace code by email. It can take up to 24 hours before the code is active.
I have a problem with my order – how do I reach you?
Contact us via our contact page or email info@siliconesandmore.com. We're happy to help you quickly.
Can I order as a business?
Yes. Apply for a business account; we review your application within 3 working days. After that you order while logged in and pay on invoice, with payment terms of 14 days after delivery.
EU businesses outside the Netherlands with a valid VAT number order with VAT reverse-charged (0%, intra-community supply). The VAT number is stored in your business account; it cannot be added to an order after it has been placed.