✔ Self-hardening 2-part epoxy clay, clay-like texture
✔ Mix ratio 1:1 (equal parts A and B)
✔ Working time 1 to 3 hours
✔ Fully cured after 24 hours
✔ 0 % shrinkage, water resistant
✔ Colours: Native and White
✔ 2-part epoxy adhesive and filler paste
✔ Mix ratio 1:1 (equal parts A and B)
✔ Working time 1 to 3 hours
✔ Set after approx. 6 hours, full cure after 24 hours
✔ 0 % shrinkage, waterproof
✔ Can be coloured with pigment or paint
✔ Self-hardening 2-part epoxy clay
✔ Mix ratio 1:1 (equal parts A and B)
✔ Working time 1 to 3 hours
✔ Hard and waterproof after 24 hours
✔ 0 % shrinkage, semi-gloss finish
✔ Various colours, can be intermixed
✔ Bright white 2-part epoxy clay
✔ Very fine grain for detail work
✔ Mix ratio 1:1 (equal parts A and B)
✔ Working time approx. 1 hour
✔ Fully cured after 24 hours (20 °C)
✔ 0 % shrinkage, water resistant
✔ Kneadable 2K epoxy with carbon fibre
✔ Lightweight: 0.50-0.55 g/cm³ cured
✔ For rigid support shells around silicone moulds
✔ Mix ratio 5:1
✔ Working time 25-30 minutes
✔ Cured after 10-12 hours
✔ Kneadable 2K epoxy with glass fibre
✔ For rigid support shells around brush-on silicone moulds
✔ A: grey-white paste, B: blue liquid
✔ Rolls out to a sheet of approx. 3 to 5 mm
✔ Working time 20-30 minutes
✔ Cured after 10-12 hours
