Holiday season we are working with a smaller team, so your order may take a little longer to arrive. Thank you for your patience.What this means for your order
✔ For medium-sized objects
✔ Clear, colorless, With the best UV stability available in Epoxy
✔ Temperature resistant up to 46°C
✔ Shore D 85 to D 21
✔ Castings 1 cm - 9 cm
✔ 19 hours @23 °C* demould ime
✔ Mix ratio. (Weight)100:40
Water-fillable sculpture busts from The Monster Makers. Create your sculpture. Fill with warm water and your sculpture will come off easily. These Sculpture Busts are very strong and will therefore last for years.
✔ Elastic, Strong, High details
✔ Amber, Fast, High pulling power
✔ Shore A 40
✔ Castings 1mm <> 60 mm.
✔ 23-27 minutes handling time
✔ Mixing ratio (Weight) 100:50
✔ Transparent addition-curing silicone (platinum-cure), Shore A 40
✔ Excellent resistance to casting resins (polyurethane and epoxy)
✔ High tear strength > 25 N/mm for a long mold life
✔ Shrink-free curing (linear shrinkage ≤ 0.1 %)
✔ Mixing ratio 10 : 1, pot life approx. 80 minutes
✔ Slightly oily for better demolding
✔ Safe to use on skin
✔ Very good flow ability and self-deaeration
✔ Shore A 20
✔ Easy to meter and mix due to 1:1 ratio
✔ Short curing time at room temperature
✔ Translucent
✔ Easy to color with common colors for special effect applications
✔ Good bonding to top coats like Glatzan, Super Baldiez or similar products
✔ Adjustable in thixotropy with ELASTOSIL® FX Thixo
✔ Adjustable in hardness and tackiness with ELASTOSIL® FX Softener
Synthetic mica has a high gloss factor, high color purity and is of superior quality. We strive for 100% slave-free mica color pigments. Read here why we think this is so important...
✔ Suitable for many types of wax!
✔ For casting (colouring through and through): 1 to 2 grams per kg.
✔ For dipping: 10 to 15 grams per kg. paraffin
✔ Many colors available
✔ Professional material
✔ Cartridges for Sulzer Mixpac™ DM 1500-01 Dispenser - 2K mixing system
✔ Consists of a cartridge with a pre-assembled cap and two separate pistons
✔ Made of Polypropylene plastic
✔ useful for quickly making a casing
✔ including clamps
✔ adjustable size, which means less wastage of material
✔ lasts a long time
✔ indispensable tool for the professional
With the FLUXX tap you make it easier to pour liquids quickly and cleanly
✔ Suitable for 25 and 30 liter Jerry cans with an opening of 6 cm
✔ Self venting
✔ minimal change in physical properties over a wide temperature range
✔ excellent water repellent properties
✔ good dielectric properties
✔ low surface tension and therefore high surface activity
✔ high chemical inertness
✔ low pour point and high flash point
✔ good solubility in a wide range of solvents
✔ useful for quickly making a casing
✔ including clamps
✔ adjustable size, which means less wastage of material
✔ lasts a long time
✔ indispensable tool for the professional
✔ Minimal change in physical properties over a wide temperature range
✔ Excellent water-repellent properties
✔ Good dielectric properties
✔ Low surface tension and therefore high surface activity
✔ Highly chemically inert
✔ Low pour point (-60°C)
✔ High flash point (>205°C)
✔ Good solubility in a wide range of solvents
✔ Elastic, Strong, High details
✔ Pale yellow, High tear strength
✔ Shore A 60
✔ Castings 1mm <> 60 mm.
✔ 12 minutes handling time
✔ Mixing ratio (Weight) 100:50
✔ Very high stretch
✔ Recommended service temperature from -45 °C to +230 °C
✔ max. recommended short term peak temperature exposure 250°C
✔ non-thixotropic
✔ Flowable
✔ Heat resistant
✔ Low viscosity
✔ One-component
✔ Solvent-free
✔ minimal change in physical properties over a wide temperature range<!--en-->✔ excellent water-repellent properties<!--en-->✔ good dielectric properties<!--en-->✔ low surface tension and thus high surface activity<!--en-->✔ high chemical inertness<!--en-->✔ low pour point and high flash point<!--en-->✔ good solubility in a wide range of solvents
A water-dilutable solvent-free silane emulsion concentrate for making stone and other building materials water-repellent
✔ Appearance: Milk White Liquid
✔ Active substance by weight %: 50
✔ Density @25 o C: 0.95
✔ pH: 6 to 8
✔ Very fast
✔ Low dosage
✔ Can be used neat or mixed
✔ Retain properties of other hardener at low dosage
✔ Low shrinkage (< 0.3 %)
✔ 5 minutes working time
✔ Mixing ratio (Weight) 100:2