Holiday season we are working with a smaller team, so your order may take a little longer to arrive. Thank you for your patience.What this means for your order
Burst 100 Antifoam provides outstanding performance under many different conditions. It is compatible with a wide variety of wetting agents, and can tolerate both alkaline and acidic binder systems.
✔ Very good flowability and self-deaeration
✔ Low Shore A hardness (approximately 25)
✔ Excellent tear strength
✔ High elongation and flexibility
✔ Excellent chemical resistance to attack by polyester and polyurethane resins, mould life is significantly extended
✔ Heat resistant up to 140 ° C
✔ Can be processed up to 10 kg in one go
✔ Clear, colorless, UV blocker
✔ Liquid as pouring syrup (viscous)
✔ Shore D 90 (hard)
✔ Castings 0.05 mm <> 10 mm
✔ 15 minutes working time *
✔ Mixer. (Weight) 100:50
Water resistant sandpaper. Available in different grain sizes. Excellent for sanding hard surfaces. Silicon carbide with a hard, sharp-edged structure.
✔ Safe to use on skin
✔ Very good flow ability and self-deaeration
✔ Shore A 10
✔ Easy to meter and mix due to 1:1 ratio
✔ Short curing time at room temperature
✔ Translucent
✔ Easy to color with common colors for special effect applications
✔ Good bonding to top coats like Glatzan, Super Baldiez or similar products
✔ Adjustable in thixotropy with ELASTOSIL® FX Thixo
✔ Adjustable in hardness and tackiness with ELASTOSIL® FX Softener
Due to the structure of the polishing pad, the contact between polishing pad and polishing wax or polishing paste remains optimal. This ensures a stable working of the polisher on the surface.
✔ Acetoxy-curing RTV-1 silicone
✔Low Shore A hardness
✔ Excellent adhesion without primer on many surfaces
✔ Good heat stability
✔ One component
✔ Immediately ready for use
✔ Also usable for FIPG/ CIPG
✔ Shore A 31 — middelhard, optimaal voor pad-printing
✔ Pot life 30 minuten, ontvormen na 5 uur
✔ Mengverhouding 9:1 (A:B) op gewicht
✔ Scheursterkte 30 N/mm — lange padlevensduur
✔ Krimpvrije uitharding bij kamertemperatuur
✔ 9 liter capacity
✔ Professional quality
✔ Excluding pump
✔ Material: aluminum
✔ 22 x 22 cm. Ø x Height
✔ Final vacuum pressure: 98%
✔ Transparent lid
✔ Hard, Non-Toxic, Sulfur Free
✔ Harder than Original, Less sticky
✔ Red-Brown, Does not dry out
✔ Very smooth structure
✔ Fully meltable
✔ Working temperature up to 32 ° C (90 ° F)
✔ High-quality silicone from Wacker
✔ Fast and shrink-free curing at room temperature
✔ Shore A 55
✔ Food-safe (FDA / BfR compliant)
✔ High tear strength
✔ Stable mechanical properties
✔ Excellent resistance to casting resins
✔ Suitable for food contact once fully cured
✔ Does not inhibit addition cure silicones
✔ Bonding and coating of silicones
✔ One component, acetoxy curing system
✔ Non slump to self levelling
✔ Excellent adhesion to many substrates
✔ Colourless transparent
✔ Electrically insulating
✔ Recommended service temperature -50 to 180 °C
✔ UV and weathering resistant
✔ Heat resistant up to 80 ° C
✔ Can be processed up to 10 kg * in 1 go
✔ Clear, colorless, UV blocker
✔ Quite liquid
✔ Shore D 90 (hard)
✔ Castings 1 mm <> 20 mm
✔ 30 minutes working time *
✔ Mixer. (Weight) 100:33
✔ Self-levelling
✔ Solvent containing
✔ Excellent adhesion on cured silicone rubber
✔ High-tear grade
✔ Recommended service temperature from -45°C to 180°C
✔ Max. recommended short term peak temperature exposure 200°C
✔ Very good adhesion to silicone substrates
✔ High elongation
✔ High reactivity
✔ Neutral odour and taste (FDA)
✔ Excellent stability and flexibility at low temperatures
✔ Suitable for compliance with the food contact regulations
✔ 6 intermixable colors
✔ For bright or pastel shades
✔ High pigment content dyes
✔ A few flakes are enough for a saturated color
✔ Easy to mix with paraffin wax