The Silicone Foam Closed Cell 3 is a 2-component (Platinum) Poly-Addition casting silicone that cures at room temperature and foams up to 3 times the volume. This silicone can of course also be colored with silicone dye.This silicone is used...
The Silicone Foam Closed Cell 3 Spreadable is a 2-component (Platinum) Poly-Addition casting silicone/ spreadable silicone that cures at elevated temperature and foams up to 3 times the volume. This silicone can of course also be colored with silicone dye.This...
The Silicone Foam Closed Cell 5 is a 2-component (Platinum) Poly-Addition casting silicone that cures at room temperature and foams up to 5 times its volume. This silicone can of course also be colored with silicone dye.This silicone is used...
The Silicone Foam Open Cell 6 is a 2-component (Platinum) Poly-Addition casting silicone that cures at room temperature and foams up to 6 times its volume. This silicone can of course also be colored with silicone dye.This silicone is used...
The Silicone Foam Open Cell 7 Spreadable is a 2-component (Platinum) Poly-Addition casting silicone that cures at elevated temperature and foams up to 7 times its volume. This silicone can of course also be colored with silicone dye. This is...
Suitable for silicones with a 1:1 mixing ratio and a viscosity up to max 22,000 cps (22000 mPas). The Top Gear Six 1: 1 is a very simple silicone dispenser that works on air pressure. This dispenser comes with a...
Works fast Very fluid Long shelf life Description The best way to remove non cured silicone. Silicone remover is a liquid which dissolves uncured silicone which facilitates cleaning of uncured silicone spills. Technical data This liquid dissolves fluid silicones, meaning...
Properties Uncured Property Condition Value Method Color - red - Density 23 °C 1.10 g/cm³ DIN EN ISO 1183-1 A Viscosity D = 0,5 1/s 25 °C 9000 ISO 3219 Viscosity D = 25 1/s 25...
Wacker silicone adhesive N2010 Neutral curing silicone adhesive, suitable for electronics. Translucent Sprayable Adheres to many surfaces, even without pre-treatment Solvent-free Recommended exposure temperature after curing: -45 °C to +180 °C 1 component system Self-levelling/self-flattening Applications For (small) household appliances....
Moisture Curing Silicone Rubber (RTV-1) Properties ready-to-use, one-component system low module excellent primerless adhesion to many substrates no use of organotin catalysts Specific features Flexible at low (-40 °C) and high temperatures (+180 °C) Flowable Low viscosity Solvent-based...
Adding this material to textile silicone causes the silicone to swell during curing at elevated temperatures. The final result depends on the heating temperature and the amount of foam agent added. Please note: the textile silicone used also has a...
PLEASE NOTE: since August 2023, polyurethane with a diisocyanate content of more than 0.1% may only be used in companies where employees have completed the required courses. Companies can register for online training via THIS link. You can also read more information here....
These Sulzer Mixpac™ mixing tips can be used with the DM 1500-01 Dispenser manual - 2K mixing system.Model:
MFQ 8.7-24
Inner diameter: 8.7 mm.
Number of elements: 32
Length: 198mm.
Contents full (approx.): 14.75 ml.
SRA 6200 is a multi-purpose, medium duty, silicone mould release agent. It is based on silicones and has been formulated as a highly effective, multi-purpose release agent for most waxes, plastics and rubber moulding purposes. SRA 6200 provides a medium...
DIY Easy Slurry This set contains all the ingredients to make 30 liters of slurry for the ceramic bowl method yourself. This slurry does not need to be stirred continuously, but only once a week or every 2 weeks and...
Stearin is often added to paraffin for candles to improve combustion properties. Because of the amount of benefits that the stearin brings, this is definitely recommended. Adding stearin to paraffin provides: Improved combustion properties Less dripping less smoke Candle burns...
The Stensil ECO 20 malleable silicone, is a 2 component (Poly-Addition) silicone that cures at room temperature. The silicones are very easy to mix and process by hand. The silicones are ready for use after just 5 minutes. Easy to...
The Stensil ECO 30 malleable silicone, is a 2 component (Poly-Addition) malleable silicone that cures at room temperature. The silicones are very easy to mix and process by hand. The silicones are ready for use after just 5 minutes. Easy...
The Stensil ECO 50 malleable silicone, is a 2 component (Poly-Addition) silicone that cures at room temperature. The silicones are very easy to mix and process by hand. The silicones are ready for use after just 5 minutes. Easy to...
The Stensil ECO 50 L malleable silicone, is a 2 component (Poly-Addition) malleable silicone that cures at room temperature. The silicones are very easy to mix and process by hand. The silicones are ready for use after just 5 minutes....
The Stensil ECO 50 malleable silicone, is a 2 component (Poly-Addition) silicone that cures at room temperature. The silicones are very easy to mix and process by hand. The silicones are ready for use after just 5 minutes. Easy to...
The Stensil ECO 60 malleable silicone, is a 2 component (Poly-Addition) silicone that cures at room temperature. The silicones are very easy to mix and process by hand. The silicones are ready for use after just 5 minutes. Easy to...
The Stensil ECO 70 malleable silicone, is a 2 component (Poly-Addition) silicone that cures at room temperature. The silicones are very easy to mix and process by hand. The silicones are ready for use after just 5 minutes. Easy to...
The Stensil ECO 95 malleable silicone, is a 2 component (Poly-Addition) malleable silicone that cures at room temperature. The silicones are very easy to mix and process by hand. The silicones are ready for use after just 5 minutes. Easy...
Platinum SiliconeQM 272 – High-quality casting silicone for professional use Key Features Relatively high hardness for silicone rubber Low shrinkage <0.1% for dimensionally stable results Good fluidity and self-venting during processing Suitable for hard but flexible molds Excellent resistance to...
This 1500ml. Sulzer Mixpac™ cartridges are intended for use with the DM 1500-01 Dispenser Manual - 2K Mixing System. The cartridges Set consists of a cartridge with a pre-assembled cap and two separate pistons. In addition to these cartridges, the...
These Sulzer Mixpac™ mixing tips can be used with the DM 1500-01 Dispenser manual - 2K mixing system.Model:
MFQ 8.7-24
Inner diameter: 8.7 mm.
Number of elements: 32
Length: 198mm.
Contents full (approx.): 14.75 ml.
These Sulzer Mixpac™ mixing tips can be used with the DM 1500-01 Dispenser manual - 2K mixing system.Model:
MFQ 8.7-24
Inner diameter: 8.7 mm.
Number of elements: 24
Length: 155mm.
Contents full (approx.): 8.86 ml.
These Sulzer Mixpac™ mixing tips can be used with the DM 1500-01 Dispenser manual - 2K mixing system.Model: MFQ 8.7-24 Spray function Inner diameter: 8.7 mm. Number of elements: 24 Length: 155mm. Contents full (approx.): 8.86 ml. These mixing tubes...
We are aware of child labor in mines, where natural mica is produced. Unfortunately, these natural micas are readily available and widely available without the end user being aware of the distress they cause. We want to prevent suffering and...
This hardener works on all condensation silicones. This T21 hardener from Wacker makes the silicone more resistant to polyurethane and epoxy. This B component may also be mixed with other condensation B components to achieve a speed of your choice...
This hardener works on all condensation silicones and is especially intended for the Wacker M 4503 condensation silicones. The T-35 is easy to mix with the T-47 for shorter curing times. Processing The condensation hardening silicone can be easily mixed...
This hardener works on all condensation silicones. This T37 hardener from Wacker makes the silicone more resistant to polyurethane and epoxy. This B component may also be mixed with other condensation B components to achieve a speed of your choice...
This hardener works on all condensation silicones. This T40 hardener from Wacker, allows the normal condensation silicones to harden a little faster to a generally usable silicone rubber. This T40 can be used with all condensation hardening silicones and is...
This T 40 paste catalyst is primarily intended for the kneadable Wacker Elastosil M 1470. Processing The condensation hardening silicone can be easily mixed by hand. Mix the A and B components carefully and in the specified ratio. T40 mixture...
This hardener works on all condensation silicones. This hardener is extremely fast. If you want to work very quickly, we recommend using this special B component: Wacker T47 (1-2%). This B component may also be mixed with other condensation B...
This hardener works on all condensation silicones. This T51 hardener from Wacker makes the silicone more resistant to polyester. This B component may also be mixed with other condensation B components to achieve a speed of your choice with the...
Description Talcum Powder is a multifunctional material that can be used for many purposes. The powder is ideal to eliminate the non-slipping character of silicone, but can also be used for a fine discharge between two layers of addition silicones....
Total Cast is a clear resin suitable for coating, laminating and casting up to 20 mm thick. totalCAST Art Resin has been ASTM certified, non-hazardous and non-toxic. UV Resistance: totalCAST utilises hybrid technology to inhibit yellowing. This epoxy resin system is used...
This transparent colourant should be used in transparent epoxy or polyurethane. Please note that this material is highly concenctrated. You will need very little to dye the epoxy/polyurethane. Add the liquid drop by drop in either A or B component...
True Skin 20 - Professional Platinum Silicone Elastomer This is a castable, two-component, addition-curing silicone elastomer system. After mixing parts A and B in the correct proportions, the system will cure at ambient temperature within 24 hours, but the cure...
Description This is a castable, two-component, addition-curing silicone elastomer system. After mixing parts A and B in the correct proportions, the system will cure at ambient temperature within 24 hours, but the cure rate can be accelerated by applying heat....
Ultra Cast XT is an epoxy resin which once cured gives a very clear results with a heat resistance up to 90°C. Ultra Cast XT is an epoxy resin that cures at room temperature and gives a very transparent end...
Univet 6x3 Goggles for top mask Can be combined with all dust and half-face masks! Can be combined with almost any corrective glasses! Panoramic lens for perfect visibility in the width Good fit Compliant with EN166 and EN170 Protects against...
Fleece roller, blue thread roller Nylon ideal roller for polyester, epoxy and polyurethane on coarser surfaces and fabrics.Also suitable for applying thicker layers such as topcoat layers or gelcoat layers. Available in: 11 cm length X 1.5 cm diameter, with...
The EVD-VE115SV is a professional pump for an economic price. These Single & Double stage Oil lubricated Rotary Vane pumps reach a very good ultimate vacuum and are easy to work with. They are available in an SV-version that has...
