In industry, silicone used in numerous ways. The liquid first component silicone fluids can be used as a lubricant, or heat impregnation agent bath liquid. 2-component silicone you can also make seals and vibration-damping solutions invent or embedding. Silicones are also used to make cores. The applications are almost limited...
A1 Acrylic Resin is strong, eco-friendly and versatile for casting and laminating. Easy to mix, shrink-free and fire-resistant. Suitable for indoor and outdoor use when used with a sealer. Perfect for art, molds and sculptures!
✔ Very strong and impact resistant
✔ Clear and highly UV-resistant
✔ Shore D85
✔ Castings 1mm <> 50mm
✔ 20-25 minutes working time
✔ Mixing ratio (Weight) 100: 50
Ebalta SG 2000 L is a fast-curing polyurethane casting resin for strong, detailed castings up to 80 mm. Ideal for molds, prototypes, and models. Use with or without filler. Easy 1:1 mix ratio, high Shore D hardness, and excellent heat resistance.
✔ Heat resistant up to 95 ° C
✔ Crystal clear UV-resistant
✔ Shore D75-80
✔ Casting thickness 0.5 mm <> 5mm
✔ 90 minutes working time
✔ Mixing ratio (Weight) 100: 50
Fast-curing, high-strength polyurethane casting resin for precise molds, models, and prototypes. Cures in just 15 minutes, low shrinkage, excellent detail. Ideal for professionals, engineers, and makers.
✔ High gloss, Good liquid
✔ Crystal clear, UV resistant
✔ Shore D75-78
✔ Casting thickness: 1 mm <> 5mm
✔ 15-20 minutes working time
✔ Mixing ratio by weight: 100: 90
✔ Hard, Retains its shape quickly
✔ Beige, Strong, Very fluid
✔ Shore D 77 Unfilled
✔ Castings max 10mm unfilled to 40mm filled
✔ 2.5 minutes working time
✔ Mixing ratio (Weight) 100: 100
✔ Glass temperature 112°C
✔ Very liquid (low viscosity)
✔ Ignition temperature:> 300 ° C
✔ Freezing point: -50 ° C
✔ Making silicone softer, more stretchable, flexible
✔ Colorless and odorless
✔ FDA 21 CFR Par177.2600 deployable
✔ Elastic, Strong, High details
✔ Amber, Fast, High pulling power
✔ Shore A 40
✔ Castings 1mm <> 60 mm.
✔ 23-27 minutes handling time
✔ Mixing ratio (Weight) 100:50
✔ Elastic, Strong, High details
✔ Pale yellow, High tear strength
✔ Shore A 60
✔ Castings 1mm <> 60 mm.
✔ 12 minutes handling time
✔ Mixing ratio (Weight) 100:50
✔ Very high stretch
Apoxie Sculpt is a self-hardening, waterproof epoxy clay perfect for sculpting, modeling, and repairs. Easy to mix and shape, adheres to most surfaces, and cures rock-hard. Sand, paint or drill after curing. Ideal for artists and professionals alike.
✔ For medium-sized objects
✔ Clear, colorless, With the best UV stability available in Epoxy
✔ Temperature resistant up to 46°C
✔ Shore D 85 to D 21
✔ Castings 1 cm - 9 cm
✔ 19 hours @23 °C* demould ime
✔ Mix ratio. (Weight)100:40
✔ Good Liquid (low viscous) 200 cSt
✔ Making silicone softer, more stretchable, flexible
✔ Ignition temperature:> 300 ° C
✔ Freezing point: -50 ° C
✔ Colorless and odorless
✔ Hard, Small to slightly larger castings
✔ Beige, Strong, High details, very impact resistant
✔ Shore D 75 Unfilled
✔ Castings 4mm <>30mm
✔ 5-7 minutes working time
✔ Mixing ratio (Weight) 100:100
✔ Good Liquid (low viscous) 100 cSt
✔ Making silicone softer, more stretchable, flexible
✔ Ignition temperature:> 300 ° C
✔ Freezing point: -55 ° C
✔ Colorless and odorless
✔ minimal change in physical properties over a broad temperature range
✔ excellent water-repellent properties
✔ good dielectric properties
✔ low surface tension and thus high surface activity chemically highly unreactive
✔ low solidifying point
✔ good solubility in a wide range of solvents
✔ Food contact
✔ minimal change in physical properties over a wide temperature range
✔ excellent water-repellent properties good dielectric properties
✔ low surface tension and thus high surface activity chemically highly reactive
✔ low solidifying point
✔ good solubility in a wide range of solvents
✔ Very thin liquid (low viscous) 10 cSt
✔ Making silicone softer, more stretchable, flexible
✔ Ignition temperature: 162 °C
✔ Freezing point: -65 ° C
✔ Colorless and odorless
Aramid fabric tape for easy reinforcing finishing of objects and for reinforcement of corners and seams. Can also be used for winding / reinforcing pipes.
✔ minimal change in physical properties over a wide temperature range
✔ excellent water-repellent properties good dielectric properties
✔ low surface tension and thus high surface activity chemically highly reactive
✔ low pour point
✔ good solubility in a wide range of solvents
✔ Foam factor 6
✔ Hardness Shore C 4
✔ Open cell structure
✔ Mixing ratio (Weight) 100:100
✔ Working time 2 minutes
✔ Curing time 2 hours
✔ Density 0.193 g/cm³
✔ Cartridges for Sulzer Mixpac™ DM 1500-01 Dispenser - 2K mixing system
✔ Consists of a cartridge with a pre-assembled cap and two separate pistons
✔ Made of Polypropylene plastic
In industry, silicone used in numerous ways. The liquid first component silicone fluids can be used as a lubricant, or heat impregnation agent bath liquid.
2-component silicone you can also make seals and vibration-damping solutions invent or embedding. Silicones are also used to make cores. The applications are almost limited only by a lack of imagination.
Check out our range of silicone oils and 2-component materials. Should you not find a product that you think you need, please contact us. We can probably still help.
