Specification Table – Platinum Silicones

Product Overview & Specifications – Platinum Silicones

Click a column heading to sort. Click again to reverse the order.

Product Hardness Flow / viscosity Tensile strength Tear strength Mixing ratio Most distinctive property Application Shore A sort Viscosity sort (mPa·s) Tensile sort (N/mm²) Tear sort (N/mm)
ALPA-GEL 97166 Gel 1,000/700 mPa·s n/a n/a 1:1 Platinum-cure gel for electronics encapsulation Battery potting and electronics encapsulation 0 1000 0 0
CHT True Skin 20 Shore A 20 10,000 mPa·s 3.49 N/mm² 11 N/mm 1:1 Skin-friendly, elongation 1000% SFX prosthetics and skin applications 20 10000 3.49 11
CHT True Skin 30 Shore A 30 35,000 mPa·s 5.52 N/mm² 15.7 N/mm 100:10 Skin-friendly, elongation 100% SFX prosthetics and skin applications 30 35000 5.52 15.7
ELASTOSIL RT 607 A/B Shore A 55 Low flow n/a n/a 9:1 Flame-retardant RTV-2 silicone Rail and electronics encapsulation 55 5000 0 0
HTV platinum siliconen Shore A 40/60/80 Paste 9 N/mm² 45 kN/m n/a FDA 21 CFR 177.2600, high temperature resistance Food-safe and industrial parts 40 300000 9 45
Plastique Culinair Snel Shore A 40 Putty 3.6 N/mm² >12 N/mm 1:1 Very fast food-safe kneadable silicone Fast culinary impression moulds 40 1000000 3.6 12
PlatSil FS 00 Shore 00 52/A 5 5,000 cP 2.76 N/mm² n/a 1A:1B Fast setting, 8 min pour time, 30 min demould Fast soft SFX and mould applications 8 5000 2.76 0
PlatSil FS 10 Shore 00 60/A 13 4,200 cP 3.36 N/mm² n/a 1A:1B Fast setting, 8 min pour time, 25 min demould Rapid prototyping and fast moulds 13 4200 3.36 0
PlatSil FS 20 Shore A 20 3,000 cP n/a n/a 1A:1B Fast setting, 8 min pour time, 25 min demould Fast silicone moulds 20 3000 0 0
PlatSil Gel 0020 Shore 00 20 n/a n/a n/a 1A:1B Ultra soft, skin-safe, non-shrinking Realistic prosthetics and SFX 2 0 0 0
PlatSil Gel 0030 Shore 00 30 6,200 cP n/a n/a 1A:1B Thinner and less tacky than Gel OO Prosthetics, moulds and lifecasting 3 6200 0 0
PlatSil Gel 10 Shore A 10 15,000 cP 1.57 N/mm² n/a 1A:1B Certified skin-safe, fast demould Lifecasting and prosthetics 10 15000 1.57 0
PlatSil Gel OO Shore 00 30 22,000 cP n/a n/a 1A:1B Versatile soft silicone gel Prosthetics, moulds and lifecasting 3 22000 0 0
QM 270 Shore A 62 (70 after baking) n/a 6.9 N/mm² 17.4 N/mm 10:1 High hardness, dimensionally stable, resistant to casting resins Architecture and furniture industry 62 0 6.9 17.4
SAM Silicone Wound Shore A 5 Spreadable n/a n/a 1:1 Very soft, skin-friendly, light skin tone SFX wounds and skin effects 5 10000 0 0
Silconic Stensil ECO 20 Shore A 20 Kneadable n/a n/a 1:1 90 sec working time, low shrinkage Skin impressions and SFX moulds 20 1000000 0 0
Silconic Stensil ECO 30 Shore A 30 Kneadable n/a n/a 1:1 Strong kneadable silicone Dental technology and impression moulds 30 1000000 0 0
Silconic Stensil ECO 50 Shore A 50 Kneadable n/a n/a 1:1 Harder kneadable silicone Small moulds, jewellery and model making 50 1000000 0 0
Silconic Stensil ECO 50 L Shore A 50 Kneadable n/a n/a 1:1 Long pot life, 10 min working time Model making and larger impression moulds 50 1000000 0 0
Silconic Stensil ECO 60 Shore A 60 Kneadable n/a n/a 1:1 Firm and quick to process Jewellery and technical impression moulds 60 1000000 0 0
Silconic Stensil ECO 70 Shore A 70 Kneadable n/a n/a 1:1 High hardness in kneadable form Industrial prototypes 70 1000000 0 0
Silconic Stensil ECO 95 Shore A 95 Kneadable n/a n/a 1:1 Very hard Hard impression moulds and industrial applications 95 1000000 0 0
Silicone Soft Flex 00 35 Shore 00 35 6,000–8,000 mPa·s 1.3–1.7 N/mm² 6–8 N/mm 1:1 Very flexible and skin-safe Masks, robotics and puppets 4 7000 1.5 7
Siliconen Additie Gel 840 Helder Shore 00 0 125 mPa·s n/a n/a 1:1 Very clear and shock absorbing Potting and damping 0 125 0 0
Siliconen Additie Green 30 Shore A 25–30 6,000 mPa·s 5 N/mm² >20 N/mm 1:1 Good resistance to more aggressive resins Durable moulds for epoxy, PU and polyester 27 6000 5 20
Siliconen Additie Helder 0 Shore A 0 2,000–3,000 mPa·s 0.6 N/mm² 4–6 N/mm 1:1 Firm clear gel Potting and soft transparent applications 0 2500 0.6 5
Siliconen Additie Helder 25 Shore A 24–27 4,000 mPa·s 0.5 N/mm² >8 N/mm 1:1 Crystal clear and flexible Transparent potting and clear moulds 25 4000 0.5 8
Siliconen Additie Helder 5 Shore A 4–6 4,000 mPa·s 2 N/mm² >6 N/mm 1:1 Very soft and crystal clear Soft transparent moulds 5 4000 2 6
Siliconen Additie Kleurloos 25 Shore A 23–27 3,900 mPa·s 7±2 N/mm² 30±2 N/mm 1:1 High tensile and tear strength, >420% elongation Strong moulds for concrete, cement and end products 25 3900 7 30
Siliconen Additie Kleurloos 5 Shore A 5 1,300 mPa·s 3±0.5 N/mm² >8 N/mm 1:1 Very soft, flexible and translucent Masks and flexible moulds 5 1300 3 8
Siliconen Additie Kleurloos 50 Shore A 50 13,000 mPa·s 8 N/mm² 14 N/mm 1:1 Hard and strong Concrete and heavy casting compounds 50 13000 8 14
Siliconen Additie Pink 10 Shore A 10 3,000 mPa·s 3.5 N/mm² >15 N/mm 1:1 Soft, pink and strong Flexible moulds and soft parts 10 3000 3.5 15
Siliconen Additie Yellow 25 Shore A 20–25 6,000 mPa·s 4 N/mm² >18 N/mm 1:1 Suitable for many casts, resistant to more aggressive resins Durable moulds with undercuts 22 6000 4 18
Siliconen Culinair Shore A 25 6,000 mPa·s 5.0 N/mm² 25 N/mm 1:1 § 31 LFGB (TÜV, Pass) Chocolate, confectionery, fondant and baking moulds 25 6000 5 25
Siliconen Glas Effect Shore A 23–27 100 mPa·s 0.05 N/mm² >20 N/mm 1:1 Very brittle and crystal clear Glass-like SFX effects 25 100 0.05 20
Siliconen schuim Gesloten Cel 2 Shore C 12 4,000 mPa·s n/a >20 N/mm 1:1 Expansion factor 2, closed cell Damping and lightweight silicone parts 35 4000 0 20
Siliconen schuim Gesloten Cel 3 Shore C 2–50 11,500 mPa·s n/a >20 N/mm 1:1 Expansion factor 3, closed cell Lightweight technical parts 7 11500 0 20
Siliconen schuim Gesloten Cel 5 Shore C 7 5,000 mPa·s n/a >20 N/mm 1:1 Expansion factor 5, low density Very light damping 23 5000 0 20
Siliconen schuim Open Cel 6 Shore C 4 8,000 mPa·s n/a >20 N/mm 1:1 Open cell structure Compression and soft damping 13 8000 0 20
SilSo Lite 21025 n/a 17,000 cP n/a n/a 1:1 by volume UL 94 V-0, thermal protection, primerless adhesion EV batteries and PCB encapsulation 17000 0 0
Wacker Cenusil M 825 A/B Shore A 25 8,000 mPa·s 5 N/mm² >20 N/mm 1:1 Suitable for models with pronounced undercuts Concrete moulds and reproduction moulds 25 8000 5 20
Wacker Elastosil FX 10 Shore A 10 5,000 mPa·s >4.5 N/mm² >20 N/mm 1:1 Skin-safe, transparent, adjustable thixotropy SFX skin moulds and prosthetics 10 5000 4.5 20
Wacker Elastosil FX 28 Shore A 28 10,000 mPa·s 6 N/mm² > 25 N/mm 1:1 Skin-safe, transparent and adjustable SFX moulds with medium hardness 28 10000 6 25
Wacker Elastosil M 4370 A/B n/a Pourable n/a n/a 9:1 Suitable for low-melting metal alloys Moulds for metal casting and printing rollers 5000 0 0
Wacker Elastosil M 4600 A/B Shore A 20 15,000 mPa·s 7 N/mm² >20 N/mm 10:1 BfR and FDA compliant (Wacker) Food-safe moulds and potting 20 15000 7 20
Wacker Elastosil M 4630 n/a Pourable n/a n/a 10:1 FDA and BfR, suitable for concrete Concrete moulds and food contact 5000 0 0
Wacker Elastosil M 4641 Shore A 43 30,000 mPa·s >4.5 N/mm² >25 N/mm 10:1 Transparent, food-safe, resistant to casting resins Clear casting-resin moulds 43 30000 4.5 25
Wacker Elastosil M 4642 Shore A 37 15,000 mPa·s 7 N/mm² >30 N/mm 10:1 High tear strength, resistant to casting resins PU and epoxy moulds 37 15000 7 30
Wacker Elastosil M 4644 Shore A 40 50,000 mPa·s 5.5 N/mm² >25 N/mm 10:1 Transparent, resistant to PU and epoxy Resin casting moulds 40 50000 5.5 25
Wacker Elastosil M 4670 Shore A 55 80,000 mPa·s >5.5 N/mm² >12 N/mm 10:1 FDA and BfR compliant, stable mechanical properties Harder food-safe and resin-resistant moulds 55 80000 5.5 12
Wacker Elastosil RT 601 Shore A 45 3,500 mPa·s 6 N/mm² >20 N/mm 9:1 Crystal clear Potting of automotive and optical parts 45 3500 6 20
Wacker Elastosil RT 602 Shore A 30 3,500 mPa·s 1.5 N/mm² >20 N/mm 9:1 Very transparent and heat stable All-round potting 30 3500 1.5 20
Wacker Elastosil RT 629 Shore A 31 8,000 mPa·s 6 N/mm² 31 N/mm 10:1 Antistatic surface Antistatic silicone parts 31 8000 6 31
Wacker Elastosil Vario 15 Normaal Shore A 15 (adjustable 15–40) 3,000 mPa·s 6.5 N/mm² >15 N/mm 100:10 Translucent, 150 min working time, food-safe Transparent moulds and prototyping 15 3000 6.5 15
Wacker Elastosil Vario 15 Snel Shore A 15 (adjustable) 3,000 mPa·s 6.5 N/mm² >15 N/mm 100:10 Very fast, 2 min working time Fast prototyping 15 3000 6.5 15
Wacker Elastosil Vario 40 Normaal Shore A 40 (adjustable) 10,000 mPa·s 8 N/mm² >15 N/mm 100:10 Transparent, 60 min working time Firmer transparent moulds 40 10000 8 15
Wacker ELASTOSIL C 1200 A/B Shore A 25 20,000 mPa·s 5 N/mm² >25 N/mm 1:1 Reusable vacuum bags Composite vacuum bags 25 20000 5 25
Wacker ELASTOSIL M 4601 A/B Shore A 28 10,000 mPa·s 6.5 N/mm² >30 N/mm 90:10 Food-safe and suitable for tin casting Moulds and reproduction 28 10000 6.5 30
Wacker Elastosil RT 620 A/B Shore A 17 6,000 mPa·s 5 N/mm² >12 N/mm 10:1 Very soft and suitable for food contact Pad-printing stamps 17 6000 5 12
Wacker Stensil ECO 20 Shore A 20 Kneadable n/a n/a 1:1 90 sec working time, low shrinkage Skin impressions and SFX moulds 20 1000000 0 0
Wacker Stensil ECO 50 Shore A 50 Kneadable n/a n/a 1:1 Harder kneadable silicone Small moulds, jewellery and model making 50 1000000 0 0
Wacker Elastosil M 4630 (new) n/a Pourable n/a n/a 10:1 FDA and BfR, suitable for concrete Concrete moulds and food contact 5000 0 0
WACKER SilGel 612 A/B Silicone gel 1,000 mPa·s n/a n/a 1:1 Crystal clear, tacky, UL 94HB Electronic potting 0 1000 0 0
Zhermack SFX 00 20 Shore 00 20 2,200 cP n/a n/a 1:1 Biocompatible and skin-safe SFX prosthetics and skin applications 2 2200 0 0
Zhermack SFX 00 30 Shore 00 30 22,000 cP n/a n/a 1A:1B Ultra soft, skin-safe, non-shrinking SFX prosthetics 3 22000 0 0
Zhermack SkinForm Shore A 22 Spreadable n/a n/a 1:1 Spreadable and skin-friendly Bodycasting and SFX moulds 22 10000 0 0

Service over Sales.

Experience it yourself!

Follow us

Sign up for our newsletter

Receive the latest offers and promotions

© 2026 siliconesandmore

  • American Express
  • Apple Pay
  • Bancontact
  • Google Pay
  • iDEAL Wero
  • Klarna
  • Maestro
  • Mastercard
  • MobilePay
  • PayPal
  • Union Pay
  • Visa

Compare  0 / 3

Login

Forgot your password?

Don't have an account yet?
Create account